USB to SATA Hard Drive Based on INIC-1618L Solution USB 2.0
2026-09-26 23:00:00 | pcba-mkr
A USB to SATA bridge made based on the INIC-1618L scheme, supporting USB 2.0, has been tested and verified on W Guest Cloud for over half a year. The verification results are OK. For the official version, please refer to the updated naming suffix for the verification progress.
The chips can be purchased for just a few yuan each on Taobao, and the peripheral materials are not expensive either. The cost of making one board is in the single digits. As a 2.0 solution, it is quite attractive for devices that do not care about speed.
